This is the Minimus 32 which is powered by more expensive Atmel ATMEGA32U2 AVR USB Controller.
We are official resellers for the Minimus 32 AVR USB Development Board !
We have tested this and it works prefectly. It is very easy to program and can be updated at any time without fuss. Unlike other poorly designed AVR Kits, all the IO's are accessible, there are power and status LED's and includes a real USB male connector for easy plug and play action.
Presenting Minimus 32 AVR USB, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus 32 AVR USB is powered by an Atmel ATMEGA32U2 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
Note: The Minimus 32 AVR USB uses a larger Atmel 32k controller than the Minimus AVR USB so you will need to run at least Atmel Flip v3.4.2 and all codes must be compiled as ATMEGA32U2.