Xecuter CK3 Pro (Rev D) + CK3 Probe v2 - 360 Bundle Deals - Xbox 360 - ModTraders.co.uk

SAVE MONEY WITH THIS BUNDLE OFFER !!

The CK3 Pro (Rev D) is an Xbox 360 DVD drive adapter that enables you to connect ANY model to your PC and to repair / upgrade the firmware. 100& Supports ALL versions of Hitachi, Samsung, Benq and Liteon.

Feature List:

- Newly Designed Circuit (Rev D)
- USB Support (Liteon 74850 Support)
- RS232 Support (Liteon 74850 Support)
- Powers ALL XBOX 360 DVD Drives inc the new Liteon 83850V2 & 93450
- Mode-B on Hitachi 59 & Earlier (Hitachi 78/79 Mode-B via CK3 Tool or Jungle Flasher)
- 100% Compatible with all flashing tools inc Jungle Flasher
- Onboard ON/OFF Switch
- Onboard Eject Switch
- FREE 360 Hard Drive Adapter
- Effortlessly transfer files from your 360 hard drive to your PC without opening up the case!
- FREE USB Cable
- High Build Quality
- Trusted Xecuter Design

For various instructions and guides please visit www.team-xecuter.com

ALSO INCLUDES THE NEW XECUTER CK3 PROBE 2 !

IMPORTANT NOTE: Xecuter have allowed us a small amount of PROBE 2 stock without the conductive glue that will soon be included with the Probe v2 ! So all those of you who can simply repair the trace cut with your own glue or solder can now get your hands on one of these bad boys.

After the amazing success of the Xecuter LT Switch solution for Liteon drives, Team Xecuter have launched the latest addition to their CK3 family of products – the FIRST complete NO SOLDER* solution for the new version Liteon DVD drives – the CK3 Probe v2.

This is targeted to installers who require a multi-use no solder* solution to the new Liteon drives – or to the users who simply don’t have the skills to solder the cheaper Xecuter LT Switch alternative. Still retaining the original CK3 Probe function of dumping the 74850 key (the only product to date to have both original Probe v1 and Probe v2 LT Switch (MRA) functions in the same device), but now also enabling full firmware access of the new 83850V2 and 93450 drives – you can easily switch between PROBE and LT Switch Modes.

A complete all-in-one solderless* solution ! Installers can use this again and again and again and again – No rebuild boards – No soldering* – NO PROBLEM !

The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LED’s and an extra protection circuit against accidental shortages on the DVD PCB.

• The First No-Solder Solution For ALL Liteon Drives including no trace cut for Liteon 74850 !
• Original CK3 Probe Function (Liteon 74850 DVD Key) - No Trace Cutting !
• New No-Solder LT Switch Probes (Liteon 83850V2 & Liteon 93450) - Small PCB Trace Cuts - Repaired With Special Conductive Glue or Solder If You Prefer
• New ©MULTI-R Feature !
• Improved Liteon Winbond Chipset Support
• Power / Status / Standby LED's
• New Protection Circuit To Protect Against Accidental Shortages (LED Permanent On Syndrome)

 * The special conductive glue for no-soldering feature will be available seperatley.

Instructions Can Be Found Here: http://team-xecuter.com/forums/forumdisplay.php?f=129

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support  nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.