Xecuter LT Switch v1.5 - ModTraders.co.uk

Xecuter LT Switch v1.5 NEW VERSION

Customer Options

Manufacurer's website

CLICK HERE FOR THE PRODUCT REVIEW BY TEAM JUNGLE !

INSTALLERS - BUY MORE FOR MUCH LESS - SEE OUR BULK PRICES ABOVE.

This is the new Xecuter LT Switch v1.5 - the latest version in the #1 selling Xecuter LT Switch range.

Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an ON/OFF Led to show correct operation when switching to 0x72 vendor mode.

Now Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

The installation is very simple and takes about 5 minutes if you have some small experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC). There is no need to remove the LT Switch after it has been installed - simply switch to normal mode and you are good to go. Even if you have to upgrade in the future - you don't have to touch the switch again !

Don't be fooled by more expensive copycat products. This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :)

The Only Liteon Solution Recommended By Team Jungle !
Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
Easy & Simple Install - Install Once & Forget
Enable / Disable Switch
Multi-R Switch (18, 20, 22 Ohms)
On/Off LED
Completely Undetectable
No Need To Uninstall
Works with ALL tools including the latest Jungle Flasher
Full Installation Tutorial - CLICK HERE

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

Related products
Customer reviews
Ask a question
Send to friend
Other products

16pc Xacto Style Knive Set

Xecuter CK3 Pro (Rev D) NEW VERSION

Xecuter Fiberglass Scratch Pen

Author: Carlouws
I ordered this for my Lite-On drive on my Jtag'ed Jasper 360. It was a really easy install. I used a fiberglass brush and a dremel to prepare the board. Installed and then proceed to use. No problems whatsoever. I have used both, Team Xecuter LT Switch and Maximus Lite Key and I gotta say, in my book, the LT Switch is the clear winner. Easy to install, easy to use, safe to use. I really recommend LT Switch to anyone over any other method to get a full dump of your Lite-ON 360 drive (it doesn't matter which version).

Author: laura jones
i brought this switch after the lt switch v1.0 did not work on my lite on 8 drive after 3 days of trying, so i got this one and the same thing was at it all day but still no luck so i thought i would whip out the new probe and can i say it worked right away for me not a problem.
i then went on to do 4 more all first time with the probe
the best thing since sliced bread.

Author: Steven Laubenheimer
This switch works like a charm, you just have to be precise with your soldering and the cuts you make in the main board.

Author: Andy Marinez
this item worked like magic....worked for my lite-on 7....my drive was busted tho i just needed the dvd key

Author: vostrikov dmitriy
A+++++ service
very fast shipping took about 5 days (because i live in belgium(europe))
i really recommend this site for purchasing stuff for xbox,ps3,etc