New Xecuter LT Switch V1 5 now in stock - Latest News - News

News

New Xecuter LT Switch V1.5 now in stock!!!

Tuesday, March 30, 2010 |

This is the new Xecuter LT Switch v1.5 - the latest version in the #1 selling Xecuter LT Switch range.

Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an ON/OFF Led to show correct operation when switching to 0x72 vendor mode.

Now Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

<< PREV | NEWS HOME | NEXT >>

Product Review

I have to say I was a little dubious but thought i'd give it a go. The instructions were easy to follow but took me about an 40 mins as I was a bit nervous. I couldn't believe that the red lights went to green first time! Saved me a ton of money as I have no warranty cus of my lovely ixtreme firm...